Blog

What are the ways to remove dissolved gases in a Desalination RO System?

Sep 03, 2025Leave a message

Hey there! As a supplier of Desalination RO Systems, I've seen firsthand how dissolved gases can throw a wrench in the smooth operation of these systems. In this blog, I'm gonna walk you through the ways to remove dissolved gases in a Desalination RO System, sharing some practical insights and tips along the way.

First off, let's understand why getting rid of dissolved gases is such a big deal. Dissolved gases like oxygen, carbon dioxide, and nitrogen can cause all sorts of problems in a Desalination RO System. Oxygen can lead to corrosion of the system components, reducing their lifespan and efficiency. Carbon dioxide can react with water to form carbonic acid, which can lower the pH of the water and cause scaling on the RO membranes. Nitrogen, although relatively inert, can still cause issues if present in large amounts, such as reducing the permeate flow rate.

Now, let's dive into the different methods of removing dissolved gases from a Desalination RO System.

1. Degasification Membranes

One of the most common ways to remove dissolved gases is by using degasification membranes. These membranes are designed to selectively allow gases to pass through while blocking the passage of water. The basic principle behind degasification membranes is based on the difference in the solubility and diffusivity of gases in the membrane material.

When the feed water containing dissolved gases comes into contact with the degasification membrane, the gases dissolve in the membrane material and diffuse through it to the other side, where they are removed by a vacuum or a sweep gas. This process effectively reduces the concentration of dissolved gases in the water.

Degasification membranes are available in different configurations, such as hollow fiber and spiral wound. Hollow fiber membranes offer a large surface area for gas transfer, making them highly efficient. Spiral wound membranes, on the other hand, are more compact and easier to install.

If you're interested in learning more about commercial-grade RO systems that might incorporate degasification membranes, check out our Commercial Reverse Osmosis Systems.

2. Vacuum Degasification

Vacuum degasification is another popular method for removing dissolved gases from water. In this process, the feed water is exposed to a vacuum environment, which reduces the partial pressure of the gases above the water surface. According to Henry's law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. By reducing the partial pressure, the dissolved gases are forced out of the water and into the vapor phase, where they can be removed by a vacuum pump.

Vacuum degasification systems typically consist of a degassing chamber, a vacuum pump, and a condenser. The feed water is introduced into the degassing chamber, where it is sprayed or distributed over a packing material to increase the surface area for gas transfer. The vacuum pump creates a low-pressure environment in the chamber, causing the dissolved gases to be released from the water. The vapor containing the gases is then condensed in the condenser, and the liquid is returned to the system, while the gases are vented to the atmosphere.

Vacuum degasification is effective in removing a wide range of dissolved gases, including oxygen, carbon dioxide, and nitrogen. It is also relatively simple to operate and maintain. However, it requires a significant amount of energy to create and maintain the vacuum, which can increase the operating costs.

For industrial applications where vacuum degasification might be a key part of the RO system, take a look at our Industrial Reverse Osmosis System.

3. Chemical Treatment

Chemical treatment can also be used to remove dissolved gases from water. One common approach is to add chemicals that react with the dissolved gases to form insoluble compounds or to convert them into less harmful forms.

For example, sodium bisulfite can be used to remove dissolved oxygen from water. Sodium bisulfite reacts with oxygen to form sodium sulfate and water, effectively reducing the oxygen concentration in the water. Another chemical that can be used is sodium hydroxide, which can react with carbon dioxide to form sodium carbonate.

Chemical treatment is relatively inexpensive and easy to implement. However, it requires careful control of the chemical dosage to avoid over - treatment, which can lead to the formation of other contaminants or scaling in the RO system.

Industrial reverse osmosis system (4)Reverse Osmosis Mine Water

4. Aeration

Aeration is a simple and cost - effective method for removing dissolved gases, especially carbon dioxide. In this process, air is bubbled through the feed water, which helps to strip the dissolved carbon dioxide from the water. The carbon dioxide is released into the air and carried away by the airflow.

Aeration can be achieved using different types of aerators, such as diffused aerators, surface aerators, and spray aerators. Diffused aerators release air bubbles at the bottom of the water tank, which rise to the surface and carry the dissolved gases with them. Surface aerators create a large surface area of water by splashing or agitating the water, allowing the gases to escape into the air. Spray aerators spray the water into the air, increasing the contact area between the water and the air and facilitating the removal of dissolved gases.

Aeration is most effective for removing carbon dioxide, but it can also help to reduce the concentration of other dissolved gases to some extent. However, it may not be sufficient to completely remove all the dissolved gases, especially in cases where the gas concentration is high.

5. Biological Treatment

In some cases, biological treatment can be used to remove dissolved gases, particularly oxygen. Biological treatment systems use microorganisms to consume the dissolved oxygen in the water as part of their metabolic processes. These microorganisms are typically aerobic bacteria that require oxygen to survive and grow.

The feed water is introduced into a biological treatment tank, where the microorganisms are present. The bacteria consume the dissolved oxygen in the water, converting it into carbon dioxide and water. The carbon dioxide can then be removed using one of the other methods mentioned above, such as aeration or degasification.

Biological treatment is a natural and environmentally friendly way to remove dissolved oxygen. However, it requires careful control of the operating conditions, such as temperature, pH, and nutrient availability, to ensure the growth and activity of the microorganisms.

Conclusion

Removing dissolved gases from a Desalination RO System is crucial for ensuring the efficient and reliable operation of the system. There are several methods available, each with its own advantages and disadvantages. The choice of the method depends on various factors, such as the type and concentration of the dissolved gases, the water quality requirements, the system capacity, and the operating costs.

As a Desalination RO System supplier, we can help you select the most suitable method for your specific application. Whether you need a commercial system for a small - scale operation or an industrial system for a large - scale desalination plant, we have the expertise and the products to meet your needs.

If you're dealing with mine water and need a specialized RO system that can handle the unique challenges of removing dissolved gases in that context, check out our Reverse Osmosis Mine Water solutions.

If you're interested in learning more about our Desalination RO Systems or have any questions about removing dissolved gases, feel free to reach out to us. We're always happy to have a chat and discuss how we can help you optimize your RO system.

References

  • Crittenden, J. C., Trussell, R. R., Hand, D. W., Howe, K. J., & Tchobanoglous, G. (2012). MWH's Water Treatment: Principles and Design. John Wiley & Sons.
  • Green, D. W., & Perry, R. H. (2007). Perry's Chemical Engineers' Handbook. McGraw - Hill.
  • AWWA (American Water Works Association). (2017). Water Quality and Treatment: A Handbook of Community Water Supplies. McGraw - Hill.
Send Inquiry