Today, as global water resources become increasingly scarce, high hopes are placed on seawater desalination technology. It acts like a magical "filter," capable of transforming the vast, salty ocean into a precious freshwater resource. However, in the transition of this technology from concept to reality, we must confront and solve some of the key challenges it faces. As practitioners in the field, we are often asked: what are the core concerns of seawater desalination? In summary, there are three main points: high energy consumption, the environmental impact of brine, and the issue of chemical use. Below, we will delve into each of these three issues and clarify the corresponding solutions.
► The Lingering "Energy Hog": The Issue of Energy Consumption
► What is it?
Seawater desalination, especially with the current mainstream technologies, is an energy-intensive process. Simply put, it's about "exchanging energy for water," and its operation relies on substantial electrical power.
► Why?
Taking the most widely used reverse osmosis desalination system as an example, its principle is to apply extremely high pressure to force water molecules through a special semi-permeable membrane, thereby blocking salt and other impurities. This "application of high pressure" is mainly dependent on high-pressure pumps. These pumps are the core of the entire system and also the largest energy consumers, often accounting for more than half of the total energy consumption. Consequently, high energy consumption directly translates into high operational costs, which is a major factor limiting the broader application of desalination technology.
► How to solve it?
Fortunately, technological advancements are continuously "defanging" this "energy hog." The most effective solution currently is the introduction of energy recovery devices. This device is ingeniously designed to capture and reuse the pressure energy carried by the high-pressure brine discharged from the system. This recovered energy is then used to help pressurize the seawater entering the system during the pretreatment stage, thus significantly reducing the load on the high-pressure pumps. The application of this technology has greatly lowered the energy consumption per unit of water produced by the entire reverse osmosis desalination system, leading to a qualitative leap in the economic feasibility of seawater desalination.
► The Ocean's "Gift in Return": Brine Management
► What is it?
While producing fresh water, seawater desalination also generates a byproduct-brine, with a salt concentration much higher than that of ordinary seawater. How to properly manage this "gift in return" is an environmental challenge that every seawater reverse osmosis plant must face.
► Why?
This brine is denser than the surrounding seawater and naturally sinks after being discharged into the ocean, forming a high-salinity layer in the seabed area near the discharge point. This alters the chemical properties of the local marine environment, creating survival pressure on marine organisms accustomed to specific salinity levels, especially for less mobile benthic communities, and may even disrupt the local marine ecological balance.
► How to solve it?
Responsible management is key. Currently, the common strategies adopted by the industry are "dilution" and "dispersion." First, before discharge, the brine can be pre-mixed with cooling water from a nearby power plant or other seawater to lower its salinity. Second, specially designed multi-port diffusers are installed at the discharge point. They allow the brine to be released as multiple small streams that mix quickly and evenly with the surrounding seawater, preventing the formation of high-concentration zones in localized areas. Furthermore, for both large-scale plants and smaller containerized desalination systems, site selection prioritizes marine areas with good water exchange conditions, leveraging the power of natural ocean currents to help the brine disperse rapidly.
► The Unseen "Additives": Chemical Use
► What is it?
To ensure the long-term stable operation of the equipment, some chemical agents are required in the seawater desalination process to prevent the equipment and core membrane elements from being fouled by microorganisms, mineral scaling, and other contaminants.
► Why?
Seawater has a complex composition, containing suspended solids, organic matter, and microorganisms that can easily adhere to the surface of the reverse osmosis membrane, forming "blockages," known as membrane fouling. Once membrane fouling occurs, it not only reduces water production efficiency and increases energy consumption but may also cause irreversible damage to the membrane. Therefore, adding chemicals such as antiscalants, biocides, and cleaning agents is a necessary measure to maintain the performance of a reverse osmosis desalination system. However, some residues of these chemicals may be discharged along with the brine, posing a potential risk to the marine environment.
► How to solve it?
The solution lies in "source control" and "process optimization." On one hand, there is a strong focus on developing and applying more efficient pretreatment technologies. For example, some advanced systems, such as the containerized UF-RO seawater desalination plant, incorporate physical filtration methods like ultrafiltration to effectively remove most suspended solids and microorganisms, thereby significantly reducing the required dosage of subsequent chemical agents. On the other hand, through intelligent monitoring and dosing systems, the precise use of chemicals is achieved, avoiding over-dosing. This is particularly important for a mobile desalination plant, which requires a high degree of flexibility.
In conclusion, energy consumption, brine discharge, and chemical use are the three core issues that the seawater desalination field continues to focus on and strive to overcome. Fortunately, with continuous technological innovation, we are advancing the reverse osmosis desalination system towards greater efficiency, environmental friendliness, and sustainability through various methods such as energy recovery, optimized discharge strategies, and improved pretreatment processes. The goal is to enable this technology to play a larger and more positive role in alleviating the global water crisis.
